DHA Animation Motors
The DHA Animation Motor system is a modular device designed to allow
the creation of a wide variety of motion effects such as rippling water, rising
flames, passing trains etc or abstract effects. In general it is intended for
use in combination with a gobo in a profile lantern, however it is also possible
to use it to make colour wheels or alternative effects with other types of
lantern or with other devices such as a gobo rotator. Experimentation is the key
and sometimes the best effect is found when you throw things wildly out of
focus!
In addition to your lantern and gobo, it's simplest fixed speed configuration
it comprises: a motor unit (AMU), lantern backplate and effects disc.
For Vari-Speed, the following components will be required: Vari-Speed motor
unit (AMU), lantern back plate, effects disc and vari-speed controller
PSU. The PSU may further be controlled by a 0 to 10V analogue signal
and hence also by DMX via a demultliplexer. PSUs give independent control of 2
channels. The Vari-Speed motors use an XLR4 cable and both parallel and dual
channel splitters are available. Please discuss your requirements with our hire
department, who will advise on the specific items you will need.
| |
AMU160 Motor
Vari Speed
Fixed Speed 1,2,5 RPM |
AMU 185 Motor
Vari Speed |
DHA 11
Rosco 82511
Tangential Breakup |
Not Available |
Not Available |
DHA 12
Rosco 82512
Radial Breakup |
S4 160mm
Minuette 125mm
Minim 125mm |
Not Available |
DHA 13
Rosco 82513
Spiral Breakup |
S4 160mm
Minuette 125mm
Minim 125mm |
Not Available |
DHA 14
Rosco 82514
Linear Breakup |
Not Available |
S4 190mm
SIL 185mm |
DHA 15
Rosco 82515
Triangle Breakup |
Not Available |
S4 190mm
SIL 185mm |
DHA 18
Rosco 82518
Dot Breakup |
Not Available |
S4 190mm
SIL 185mm |
DHA 19
Rosco 82519
Flicker Wheel |
S4 160mm
Minuette 125mm
Minim 125mm |
S4 190mm
SIL 185mm |
KK |
S4 160mm
Minuette 125mm
Minim 125mm |
S4 190mm
SIL 185mm |
Click here to view some example systems:
|
